While 26 years of corporate life provides a diverse experience of all sorts of projects, the following projects are of particular interest when promoting the company's capabilities in the arena of Hazardous and Nuclear Waste handling.

Consolidated Edison Power, Duke Power, Virginia Power
and various other power facilities at various sites in the Eastern US

Chain Driven Live Roller and Heavy Duty Transfers in a radioactive environment. The equipment was designed to handle the output of the volume reduction process of reactor cooling water wastes and the encapsulation of the reduced wastes in bituminous solids.

Lockheed Martin at the Oak Ridge Tennessee Site

Chain Driven Live Roller Conveyor System for the Gamma Ray Analyzation of Sealed drums and their subsequent sortation.

Taiwan Power Company

Heavy Duty Chain Driven Live Roller Conveyor Systems for the nuclear waste drum handling systems at both Chinshan and Kausheng Nuclear Power Facilities on Taiwan ROC. Both projects were the primary handling systems for the respective plants for drummed waste from volume reduction processes that has been encapsulated in Bituminous or Portland solids

General Electric Locomotive Plant

Paint waste disposal in drums for General Electric's Locomotive Plant in Erie, Pennsalvania.
Multilevel drum washing machine was designed to remove paint waste and various liquid organic materials from both tight head and open top DOT 55-gallon drums at a throughput of ten drums per hour. Drums are received at floor level and transported to an airlock infeed by horizontal

conveyors, transfers and a vertical lift. After the drum is dumped, with non-pumpable material collecting in a junk trap, the drum is washed and rinsed and returned to floor level by reversing the load cycle.

Contractor provided complete system, conceptualization of unique handling equipment, the design and fabrication of the equipment and the testing of the equipment in-house. Project was complete with PLC controllers and on-line process control and monitoring of the flow and state of all fill levels within the process equipment.

Project Site: Erie PA
Project Value: Approximately $750K

Contact Information: 2901 East Lake Road
Erie Pennsylvania 16531
Contact: Mr. Dick Cropp
(814) 875-2117